Quantity | Price each |
---|---|
1-11 | € 5,04 |
12+ | € 4,55 |
Application:
General-purpose glue for all types of wood bonding, also for hard-textured wood and block bonding.
Characteristics / Directions for Use:
Long open time, medium setting time, tough glue film, good final strength. We recommend that all materials coming into contact with the glue are made of high-quality stainless steel (German standard V2A according to DIN EN 10027 – W‑No. 1.4301 or better) or of inert plastics, e.g. Teflon, PP, polyamide. Avoid contact with other metals like zinc, brass, copper or aluminium. For more information, contact the equipment manufacturer or our technical service. Can be processed with all standard applicators, like brush, spatula, nozzle, and roller. During storage, the viscosity of the product may increase due to chemical reactions of the ingredients that cannot be influenced. Higher storage temperatures promote that increase in viscosity. We therefore recommend using a suitable tool to stir the product before use. This reduces the viscosity. The different composition of the wood ingredients, depending on e.g. the wood species, origin, logging time, and treatment, may lead to (possibly delayed) discolouring. For instance, due to the reaction between iron and tannic acid. * The data indicated above was determined at 6 – 10 % wood moisture following EN 204/205 (20 °C / 65 % RH), with a glue application of approx. 150 g/m². Our Application Technology Department and our Application Specialists will provide technical data to assist you in your choice of an appropriate product for your requirements. Please observe the information in the section “Remarks”.
Cleaning:
Machines and equipment may be cleaned after use with warm or cold water, using Jowat® Cleaner Concentrate 192.40.
Storage:
The product should remain stored in properly closed original containers, dry and cool (15 – 25 °C). For best-before date, please see container label. After the elapse of the best-before date, it is essential that you again verify that the product is fit for your intended application. Protect from frost!
Packaging:
Information about packaging types and units is available upon request.
Remarks:
For further information concerning safety, handling, transport and disposal, please refer to the Safety Data Sheet. The information on this data sheet is based on test results from our laboratories as well as on reported experience gained in the field by our customers. It can, however, not cover all parameters for each specific application and is therefore not binding upon Jowat, nor should it be relied upon in lieu of your own required testing. The information given in this leaflet does not represent a performance guarantee. Unless otherwise agreed with our customers, the values stated in the section “Specification” shall be regarded as the finally agreed upon product properties. No liability may be derived from the information contained herein nor from the information provided by our free technical advisory service.
For the complete technical data sheet click here
Please refer to the "Download" tab for the safety data sheet.
Base | Polyvinylacetat (PVAc) |
Viscosity | at 20 °C: 10.500 ± 2.000 mPas |
Classification according to EN 204 | D2 |
Open assembly time at RT [min] | approx. 9 ± 2 |
Minimum pressing time at roomtemperature [min] | approx. 15 |
Pressing pressure | >0,2 N/mm² |
Viscosity at 20 °C [mPas] | 10.500 ± 2.000 |
Pressing pressure | >0,2 N/mm² |
Solids content | approx. 48 ± 3 % |
Stress group | D2 |
pH value | at 20 °C : 4,5 ± 0,5 |
Safety data sheet available on request. May produce an allergic reaction. Contains mixture of methylchloroisothiazolinone and methylisothiazolinone