€ 94,00
Application:
Agent used to remove adhesives which can be diluted with water, from surfaces which are resistant to water, from machinery and worktops. Cured remnants of waterproof adhesives have to be removed mechanically.
Characteristics / Directions for Use:
Dissolves completely in water. Complies with the German regulation on Detergents and Cleaners/1986. To facilitate cleaning of applicator rollers, an amount of approx. 1 % has to be added to the unused adhesive remnant remaining in the roller gap. This is then allowed to circulate for several minutes. Subsequent cleaning can be carried out with tap water. Spray guns, hoses and pressurized containers, which are caked with adhesive, should be immersed for approx. 24 hours in the cleaning concentrate Jowat® 192.40, depending on the degree of soiling , this soaking cycle is to be followed up by thorough rinsing with clean water. General bonding requirements Requirements for a High-Quality Bonding Process:
Cleaning:
Storage:
Packaging:
Remarks:
For the complete technical data sheet click here
Please refer to the "Download" tab for the safety data sheet.
Viscosity | at 20 °C: fluid |
Density at +20 °C [g/cm³] | approx. 1,05 g/cm³ |
VOC content (Swiss) | 0,00% |
pH value | at 20 °C approx. 7,5 ± 1,5 |
Causes skin irritation. Causes serious eye damage.
Wash … thoroughly after handling. Wear protective gloves and eye/face protection. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a POISON CENTER/doctor. Take off contaminated clothing and wash it before reuse. If skin irritation occurs: Get medical advice/attention.