Quantity | Price each |
---|---|
1-11 | € 7,85 |
12+ | € 6,50 |
Application:
Modified PUR adhesion promoter for plastics and plastic foils (e.g. PVC foils) which are to be bonded with hot melt or dispersion adhesives. Customer trials are required. The surface pretreatment of the materials has to undergo application-related testing prior to use.
Characteristics / Directions for Use:
Fluid, easy to apply, dries fast. The viscosity of the product may change during storage due to chemical reactions of the ingredients which are beyond control. The speed of this process depends on the actual storage conditions (e.g. pressure, temperatures, etc.). Therefore, we recommend that the product's processability be verified before use. Contains UV tracer. Stir well before use. Apply with gravure or foam rubber roller, in a thin and even layer. An application of 5 – 10 g/m² (dry) has shown good results in the field. Uneven or too thick application as well as the use of insufficiently stirred material (sedimentation) will lead to flawed bonding. Roll coated substrates only after complete drying. The processing temperature of the primer and of the materials to be coated should be between 15 and 25 °C. Appearance: white under UV light: blue Key data measured according Jowat test methods. Requirements for a High-Quality Bonding Process: The properties (e.g. surface tension, plasticizer content…) and the conditioning of the substrates, as well as the processing conditions (e.g. ambient temperature, humidity…) will influence the processes of application and the coating. Customer tests under consideration of everyday production conditions are therefore absolutely necessary to define stable process parameters and to ensure that the product is fit for purpose. For best coating results, the materials to be coated should be free of dust, oil, and grease, and be dry. Avoid draft. Our Application Technology Department and our Application Specialists will provide technical data to assist you in your choice of an appropriate primer-adhesive system for your requirements. Please observe the information in the section “Remarks.” As a suggestion on how to establish high-quality bonding processes, please refer to DIN 2304.
Cleaning:
Jowat® Cleaner 401.50. Safety Considerations: Safety Considerations: Observe the safety data sheet. Especially open applicator systems require an extraction.
Storage:
The product should remain stored in properly closed original containers, dry and cool (15 – 25 °C). For best-before date, please see container label. After the elapse of the best-before date, it is essential that you again verify that the product is fit for your intended application.
Packaging:
Information about packaging types and units is available upon request.
Remarks:
For further information concerning safety, handling, transport and disposal, please refer to the safety data sheet. The information on this data sheet is based on test results from our laboratories as well as on reported experience gained in the field by our customers. It can, however, not cover all parameters for each specific application and is therefore not binding upon Jowat, nor should it be relied upon in lieu of your own required testing. The information given in this leaflet does not represent a performance guarantee. Unless otherwise agreed with our customers, the values stated in the section “Specification” shall be regarded as the finally agreed upon product properties. No liability may be derived from the information contained herein nor from the information provided by our free technical advisory service.
For the complete technical data sheet click here
Please refer to the "Download" tab for the safety data sheet.
Base | Organic solvent |
Processing temperature | 15 - 25 °C |
Density at +20 °C [g/cm³] | at 20 °C [g/cm³] : 0.85 ± 0.02 |
Viscosity at 20 °C [mPas] | 41 ± 6 |
Solids content | at 90 °C [%] : 10,5 ± 0,9 |
Highly flammable liquid and vapour. Causes serious eye irritation. May cause drowsiness or dizziness. Repeated exposure may cause skin dryness or cracking.
Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Use explosion-proof electrical/ventilating/lighting equipment. IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Αποθηκεύεται σε καλά αεριζόμενο χώρο. Ο περιέκτης διατηρείται ερμητικά κλειστός. Dispose of contents / container to approved waste disposal or recycling in accordance with national regulations.