Quantity | Price each |
---|---|
1-11 | € 11,01 |
12+ | € 9,88 |
Application:
Polychloroprene adhesive (CR) for bonding laminated materials, particleboard and hardboard to each other or to plastics, metal, wood, textile, felt and other materials. May also be used for high-quality bonding of foam materials. Not suitable for plasticized PVC, expanded polystyrene and most polyolefin. Customer trials are required. The properties of the bonded parts and, where necessary, the primer coating on the reverse side of the materials have to undergo application-related testing prior to use.
Characteristics / Directions for Use:
Stir well before use. Low in aromatics, high solids content, very good spreading with brush or even better with toothed spatula and good spraying properties, high yield, outstanding initial adhesion, good resistance to high and low temperatures. Always apply to both surfaces. After application, allow to flash off until almost no more tackiness can be noticed. Then join and press well. The processing temperature of the adhesive and of the materials to be bonded should be between 15 and 25 °C. Key data measured according Jowat test methods. Requirements for a High-Quality Bonding Process: The properties (e.g. surface tension, plasticizer content…) and the conditioning of the substrates, as well as the processing conditions (e.g. ambient temperature, humidity…) will influence the processes of joining and the bonding. Customer tests under consideration of everyday production conditions are therefore absolutely necessary to define stable process parameters and to ensure that the product is fit for purpose. For best bonding results, the materials to be bonded should be free of dust, oil, and grease, and be dry. Avoid draft. Our Application Technology Department and our Application Specialists will provide technical data to assist you in your choice of an appropriate product for your requirements. Please observe the information in the section “Remarks.” As a suggestion on how to establish high-quality bonding processes, please refer to DIN 2304.
Cleaning:
Jowat® Cleaner 401.10. Safety Considerations: Safety Considerations: Observe the safety data sheet. Especially when using open application machinery, exhaust and ventilation systems are required.
Storage:
The product should remain stored in properly closed original containers, dry and cool (15 – 25 °C). For best-before date, please see container label. After the elapse of the best-before date, it is essential that you again verify that the product is fit for your intended application.
Packaging:
Information about packaging types and units is available upon request.
Remarks:
For further information concerning safety, handling, transport and disposal, please refer to the safety data sheet. The information on this data sheet is based on test results from our laboratories as well as on reported experience gained in the field by our customers. It can, however, not cover all parameters for each specific application and is therefore not binding upon Jowat, nor should it be relied upon in lieu of your own required testing. The information given in this leaflet does not represent a performance guarantee. Unless otherwise agreed with our customers, the values stated in the section “Specification” shall be regarded as the finally agreed upon product properties. No liability may be derived from the information contained herein nor from the information provided by our free technical advisory service.
For the complete technical data sheet click here
Please refer to the "Download" tab for the safety data sheet.
Base | Polychloropren |
Density at +20 °C [g/cm³] | at 20 °C [g/cm³]: 0.86 ± 0.02 ( Jowat test method) |
Viscosity at 20 °C [mPas] | 1,300 ± 150 ( Höppler, ball 5) |
Solids content | 2 h at 90 °C [%]: 24.0 ± 2.0 (Jowat test method) |
Drying time | 3 |
Material pressure | 1 – 3 bar |
Injection pressure | 4 – 6 bar |
Diameter | 1,5 – 2 mm |
Highly flammable liquid and vapour. Causes skin irritation. Causes serious eye irritation. Suspected of damaging the unborn child. May cause drowsiness or dizziness. Toxic to aquatic life with long lasting effects. May produce an allergic reaction. Contains Product contains: Reportable explosives precursors. Making available, introduction, possession and use according to Regulation (EU) 2019/1148, Article 9. κολοφώνιο dodecane-1-thiol
Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Use explosion-proof electrical/ventilating/lighting equipment. IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Store in a well-ventilated place. Keep container tightly closed. Dispose of contents / container to approved waste disposal or recycling in accordance with national regulations.