Application:

Paper and packaging industry: Applications in the field of bonding collapsible boxes. For bonding coated and non-coated papers.

Characteristics / Directions for Use:

Very good application characteristics, contains plasticisers, good wet tack, fast setting. The results indicated are subject to variations due to material properties and processing conditions. To be processed on automatic units with nozzle and impulse nozzle application. We recommend that all materials coming into contact with the glue are made of high-quality stainless steel (German standard V2A according to DIN EN 10027 – W‑No. 1.4301 or better quality) or of inert plastics, e.g. Teflon, PP, polyamide. Density at 20 °C [g/cm³]: approx. 1.05 ± 0.02 (Jowat test method) Our Application Technology Department and our Application Specialists will provide technical data to assist you in your choice of an appropriate product for your requirements. Please observe the information in the section “Remarks”. General bonding requirements The properties of the substrates as well as the processing conditions will influence the processes of joining and the quality of the bond. Customer testing under consideration of everyday production conditions is therefore absolutely necessary to define stable process parameters and to ensure that the product is fit for purpose. The materials to be bonded should be free of dust, oil, and grease, and be dry.

Cleaning:

Before curing, machines and equipment may be cleaned after use with warm or cold water, using Jowat® Cleaner Concentrate 192.40. Already dried adhesive can be dissolved using Jowat® Thinner 401.30. Please also observe the instructions in the corresponding technical data sheet and the safety data sheet.

Storage:

For best-before date, please see container label. After the elapse of the best-before date, it is essential that you again verify that the product is fit for your intended application. Containers should remain stored at a temperature between 15 and 25 °C. Do not remove the lid completely during processing, to prevent the adhesive from drying and the formation of particles. Using a mixer during processing will generally lead to an improved application behaviour. Protect from frost!

Packaging:

Information about packaging types and units is available upon request.

Remarks:

For further information concerning safety, handling, transport and disposal, please refer to the Safety Data Sheet. The information on this data sheet is based on test results from our laboratories as well as on reported experience gained in the field by our customers. It can, however, not cover all parameters for each specific application and is therefore not binding upon Jowat, nor should it be relied upon in lieu of your own required testing. The information given in this leaflet does not represent a performance guarantee. Unless otherwise agreed with our customers, the values stated in the section “Specification” shall be regarded as the finally agreed upon product properties. No liability may be derived from the information contained herein nor from the information provided by our free technical advisory service.

Please refer to the "Download" tab for the safety data sheet.

• Sicherheitsdatenblatt